2020 Christmas Gift Card Holder using Stampin' Up! Poinsettia Petals and Quite Curvy Bundle

Hello friends. Today I have step by step instructions to make a gift card holder from half a sheet of A4 cardstock. I have used Stampin' Up! Poinsettia Petals bundle for the decoration, and a brand new bundle called Quite Curvy for the die cutting on the gift card holder. This Quite Curvy bundle will be in the Stampin' Up! 2021 January to June Mini Catalogue, but is being released early and will be available for customers to purchase from next Tuesday, 3rd November.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

Step by Step Instructions

1. Start with a piece of A4 Gray Granite Cardstock, which is cut down the centre vertically.

2. Score from right to left at 8cm and 20cm

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

3. On the 8cm end (at the right) use a circle punch (I used this 2" circle punch) to cut a semi circle in the end.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

4. Add two strips of strong adhesive (like Stampin' Up! Tear and Tape) to the inside edges of this piece. This adhesive is recommended for boxes and 3D items as it sticks really well.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

5. This then folds up to make the slot to place the gift card. 

6. Stamp a sentiment in the bottom right hand corner of the folded up piece (this will also show when the gift card holder is closed. My sentiment is from Wrapped in Christmas stamp set, and I stamped in Gray Granite ink.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

7. Add a piece of coordinating patterned paper to the top flap (I used a piece of Gray Granite patterned paper from the Neutrals 6x6" patterned paper stack) and die cut the edge with one of the new Curvy Dies (or any other decorative edging die or punch you have). I actually did mine separately but I think adhering the patterned paper on first would have been easier. When you die cut, make sure you do it high enough up so that the sentiment will be visible (but not any of the semi circle cutaway).

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

8.  For the belly band, cut a strip of Blackberry Bliss cardstock 3.5cm wide, and the length of a piece of A4 cardstock (29.7cm). Cut coordinating DSP the same length but only 3.3cm wide. Adhere the patterned paper to the cardstock strip. If you are joining strips of patterned paper (as I had to) to complete the length, make sure the joins aren't in the middle area, so they wont be seen on the front. I started with a strip of paper in the middle and then added at either end to ensure this.

9. Loosely fold the belly band around the gift card holder and secure with Tear and Tape at the back.

10. Add several layers of linen thread around the belly band and tie at the back. I gathered these together under where the flower was going to be and secured with a piece of tape. I then fanned the threads out a bit at the top and bottom.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

11. The flower was watercoloured in the same way as I did the flower in THIS post, except I used Melon Mambo and Blackberry Bliss reinkers this time, and only used Blackberry Bliss die cut foliage.

12. The flower is attached using Stampin' Dimensionals and I have coloured the clear Rhinestone jewells in the centre of the flower using my light Blackberry Bliss Stampin' Blends marker.

DIY gift card holder step by step instructions with pictures. Uses Stampin Up Poinsettia Petals and Quite Curvy Bundles. Made by Claire Daly Stampin Up Demonstrator Melbourne Australia

There you have it! I hope you have lots of fun making up your very own Gift Card Holder. Friends and family would be wowed to receive a gift card in a holder like this at Christmas.

Get Free Weekly PDF Tutorials From Me

If you loved this project, sign up to get a weekly free project tutorial designed by me, and sent to your email each weekend.

Join my Subscriber Community for a free PDF Tutorial every week.

or Subscribe to receive all my Blog Posts by Email

Shutterstock_1456013552

You can find all the products I have used today in my Stampin' Up! Online Store, and all the individual products are linked at the bottom of the post. When you shop online with me in Australia, and use the monthly Host Code, you also qualify for a small thank you gift mid the month after your purchase. My customers love getting these little gifts in the mail. Here's the shop link (individual product links at the end of the post), and this month's host code (if it's past October when you are reading this, this month's code is in the right hand column or HERE). You can read about three ways to shop with me HERE.

Shop Online

October Host Code

Thanks for checking in today. Hope to see you back here soon,

Claire

 

Product List


Free Stampin' Up! PDF Tutorial for 3D Teepee Fun Fold Christmas card

Hello crafty friends. 

Today I have a free PDF tutorial for you to download, to show you how to make this 3D Teepee Christmas card , which collapses flat to fit into a standard C6 envelope. You most likely have everything you need to make this fun fold card at home, however I have used the Stampin' Up! Stitched Triangle dies and Stitched Stars dies on mine. The tutorial gives you all the measurements and step by step instructions with lots of photos.

Teepee 2020 Christmas Card using Stampin Up Stitched Triangles and Stitched Stars Dies. PDF Tutorial / Template download.

My paper is Heartwarming Hugs DSP from the 2020 August to December Holiday Catalogue. I have also used the Stitched Triangle Dies from Stampin' Up! for cutting the DSP, and the tutorial shows you the best measurements to fit these. For my decoration I have used the Stitched Stars Dies, the Blue Adhesive Backed Gems (so sparkly and beautiful), and a greeting from the Wrapped In Christmas stamp set.

Teepee 2020 Christmas Card using Stampin Up Stitched Triangles and Stitched Stars Dies. PDF Tutorial / Template download.

Here's how it folds down to fit in a C6 envelope.

Teepee 2020 Christmas Card using Stampin Up Stitched Triangles and Stitched Stars Dies. PDF Tutorial / Template download.

 

Get the Free PDF Here

Download MWC33 Triangle 3D Christmas Card using Stitched Triangle Dies PDF

 

Get Free Weekly PDF Tutorials From Me

If you loved this project, sign up to get a weekly free project tutorial designed by me, and sent to your email each weekend.

Join my Subscriber Community for a free PDF Tutorial every week.

or Subscribe to receive all my Blog Posts by Email

Shutterstock_1456013552

You can find all the products I have used today in my Stampin' Up! Online Store, and all the individual products are linked at the bottom of the post. When you shop online with me in Australia, and use the monthly Host Code, you also qualify for a small thank you gift mid the month after your purchase. My customers love getting these little gifts in the mail. Here's the shop link (individual product links at the end of the post), and this month's host code (if it's past October when you are reading this, this month's code is in the right hand column or HERE). You can read about three ways to shop with me HERE.

Shop Online

October Host Code

Thanks for checking in today. Hope to see you back here soon,

Claire

 

Product List


Bright Pink Stampin' Up! Poinsettia Petals 2020 Christmas Card

Let's brighten things up shall we? Today I have the beautiful Stampin' Up! Poinsettia Petals bundle from the 2020 Holiday (August to December Mini Catlogue) again, but I have brightened it up a notch or 10 with the colour.  You can view all the products I have used today using the image links at the end of the post.

Stampin Up Poinsettia Petals 2020 Christmas card in Magenta Madness. Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

Instructions to Watercolour this Poinsettia

  1. I embossed the three layers of the flower, in white embossing powder onto Fluid 100 Watercolour Paper
  2. I taped the watercolour sheet down with washi tape onto an old piece of cardboard for my work surface.
  3. Using a plastic paint palette, I added one drop of Magenta Madness reinker to one spot, 2 drops to another spot, and one drop of Blackberry bliss reinker to the third spot. I then added some water to each one (a couple of sprats of my spritzer did it). Test the colours to make sure they are the dilution you want.
  4. I spritzed the embossed images a couple of times from about 20cm away so the surface of the watercolour paper was wet.
  5. I started with the one drop of the Magenta Madness mix and  just dabbed onto the petals using my medium Waterpainter. The colour easily spreads without brushing because of all the water that is already added.
  6. I then added darker contrast with the 2 drop Magenta Madness, and finally some Blackberry Bliss in the centre and on the tips of some of the petals. If the ink isn't distributing as well as you would like, give another spray of the water spritzer.
  7. Let the inked images dry naturally and cut out with paper snips before layering together with dimensionals.
  8. After I assembeld the flower, I painted the visible bits of the flower with Wink of Stella for extra sparkle. It's hard to capture the sparkle in photos. but this one shows glimpses of it. It's much more sparkly in real life. Wink of Stella is such an affordable and easy way to give your projects sparkle.

Stampin Up Poinsettia Petals 2020 Christmas card in Magenta Madness. Claire Daly, Stampin' Up! Demonstrator Melbourne Australia
Here's what it looked like when I was watercolouring:

Pink Poinsettia in progress

My base card is Smoky Slate, and my second layer is a piece of Fluid 100 watercolour aper with a very light waterwash of Smoky Slate, which I mounted on a thin mat of Rich Razzleberry cardstock. I worked out where I wanted the poinsettia to go, and then stamped ome of the foliage from the Poinsettia Petals stamp set directly onto the watercolour paper in Smoky Slate. I also did that with the greeting. I recommend using the Stamparatus Stamp Positioning Tool for this step, because it allows you to stamp over the top again in exactly the same spot if you don't get a good stamped impression the first time (which is often the case with watercolour paper because it is so porous).

Stampin Up Poinsettia Petals 2020 Christmas card in Magenta Madness. Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

For the other foliage, I die cut some in silver foil, and others I stamped in Rich Razzleberry and die cut with the coordinating dies in the bundle. For the centre of the Poinsettia, I coloured three of the large clear Rhinestone Jewels with my dark Rich Razzleberry Stampin' Blend, so they coordinated with the rest of the project. I also added a few of the smaller clear Rhinestone Jewels (one top left, two around the bottom right of the sentiment) to balance the layout.

Stampin Up Poinsettia Petals 2020 Christmas card in Magenta Madness. Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

 

Check out more information and features of the Stamparatus Stamp Positioning Tool in this blog post HERE.

Get Free Weekly PDF Tutorials From Me

If you loved this project, sign up to get a weekly free project tutorial designed by me, and sent to your email each weekend.

Join my Subscriber Community for a free PDF Tutorial every week.

or Subscribe to receive all my Blog Posts by Email

Shutterstock_1456013552

You can find all the products I have used today in my Stampin' Up! Online Store, and all the individual products are linked at the bottom of the post. When you shop online with me in Australia, and use the monthly Host Code, you also qualify for a small thank you gift mid the month after your purchase. My customers love getting these little gifts in the mail. Here's the shop link (individual product links at the end of the post), and this month's host code (if it's past October when you are reading this, this month's code is in the right hand column or HERE). You can read about three ways to shop with me HERE.

Shop Online

October Host Code

Thanks for checking in today. Hope to see you back here soon,

Claire

 

 

Product List

 


Stampin Up Snowflake Splendor Christmas Card with Inlaid Embossing

Hello friends. Today I have another Christmas card for you. It uses the Snowflake Splendor suite of products from the 2020 Stampin Up August to December Holiday Catalogue.

I love how this card turned out with the pastel colours. There isn't any stamping on this card; it's all punched, die cut or embossed. I have used the Inlaid Embossing technique on the main layer which creates texture and interest. Instructions are below (but it's so easy!).

Stampin Up Snowflake Splendor 2020 Christmas Card using Inlaid Embossing Technique. Card by Claire Daly, Stampin' Up! Demonstrator Melbourne Australia.

I love the variation in colourin this Snowflake Splendor Designer Series Paper. This one I have used for the background looks like it has been created with sponging and inking. It's beautiful to create with.

Stampin Up Snowflake Splendor 2020 Christmas Card using Inlaid Embossing Technique. Card by Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

Inlaid Embossing Technique Instructions

Inlaid embossing just refers to the pieces you add to the card, also being included in the embossing. For this card:

  1. Start with a piece of the Snowflake Splendor DSP 9.9cm x 14.2cm which I adhered to a piece of cardstock the same size for extra weight.
  2. Punch three pieces of coordinating Snowflake Splendor DSP, using the Rectangular Postage Stamp Punch.
  3. Adhere these evenly across the centre of the card using glue or Stampin' Seal.
  4. Emoss this whole piece in the Winter Snow Embossing Folder.

Here's the piece before it was embossed.

Stampin Up Snowflake Splendor 2020 Christmas Card using Inlaid Embossing Technique. Card by Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

and here is the piece after it was embossed  with the Winter Snow Embossing Folder to create the Inlaid Embossing.

Stampin Up Snowflake Splendor 2020 Christmas Card using Inlaid Embossing Technique. Card by Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

After I had completed this layer, I sponged the edges in Misty Moonlight ink (using a sponge dauber) and then placed it onto a thin mat of Balmy Blue Cardstock, and onto a base card of Highland Heather.

Next I die cut the snowflakes in Balmy Blue Glimmer paper and Balmy Blue cardstock, using the So Many Snowflakes Dies, and popped one of the Blue Adhesive Backed Gems in the centre of each (they come in different sizes which suited my project). For the sentiment I used my Word Wishes dies and Purple Posy cardstock.

Stampin Up Snowflake Splendor 2020 Christmas Card using Inlaid Embossing Technique. Card by Claire Daly, Stampin' Up! Demonstrator Melbourne Australia

The Word Wishes Dies are a super versatile die set to own as you can create so many different die cut sentments. You can get even more sentiments when you combine it with the coordinating stamp set called A Wish for Everything. Here's a look at these two great products.

Stampin Up Word Wishes Dies. Available in Australia from myu online store or direct with Claire Daly.

A Wish for Everything Stampin Up Stamp Set. Available in Australia from myu online store or direct with Claire Daly.

I hope you like today's project. I realy love how it turned out and it's nice and sparkly for Christmas.

Other Projects using the Snowflake Splendor Suite of Products

Three cards using a single 6x6" piece of DSP HERE.

12x12" Scrapbook pages HERE and HERE

Get Free Weekly PDF Tutorials From Me

If you loved this project, sign up to get a weekly free project tutorial designed by me, and sent to your email each weekend.

Join my Subscriber Community for a free PDF Tutorial every week.

or Subscribe to receive all my Blog Posts by Email

Shutterstock_1456013552

Designer Series Paper Sale

October is a great month to stock up on Designer Series Papers. Check out the 15 paper packs on sale in October.

10-01-20_header_dsp_sale_na_uk_sp

You can find all the products I have used today in my Stampin' Up! Online Store, and all the individual products are linked at the bottom of the post. When you shop online with me in Australia, and use the monthly Host Code, you also qualify for a small thank you gift mid the month after your purchase. My customers love getting these little gifts in the mail. Here's the shop link (individual product links at the end of the post), and this month's host code. You can read about three ways to shop with me HERE.

Shop Online

October Host Code

Thanks fos stopping by today. See you back here again soon,

Claire

Product List


Sparkly Poinsettia Petals Stampin' Up! Card Idea for Christmas 2020

Hey friends.

Today I have a super sparkly card for you using the Poinsettia Petals stamp set from the 2020 Stampin' Up! Holiday Catalogue. This would make an awesome 2020 Christmas card! I have also taken advantage of the October Stampin' Up! patterned paper sale by creating a DSP background.

 

Stampin Up Poinsettia Petals card idea with Poinsettia Place DSP. 2020 Christmas card by Claire Daly Melbourne Australia.

 

This patterned paper background is one I have used over and over again. Here's the measurements so you can make it yourself.

  • The base card is a standard C6 top folding card
  • The Cherry Cobbler cardstock layer is 10.0cm x 14.3 cm
  • The left side piece of DSP is 13.9cm x 2.7cm
  • The right top side piece is 8.5cm x 2.7cm
  • The right bottom piece is 5.2cm x 2.7cm

The Poinsettia Place DSP is one of the DSP's on sale during October too. You can find it using the links at the end of the post.

Stampin Up Poinsettia Petals card idea with Poinsettia Place DSP. 2020 Christmas card by Claire Daly Melbourne Australia.

For the rest of the card, I stamped the 3 layers of the Poinsettia, and a couple of the leaves in Black Stazon onto Fluid 100 watercolour paper. I then watercoloured in Real Red and Cherry Cobbler. To get the amazing sparkle, I painted all the leaves with my clear Wink of Stella Pen (links at end of post).

Stampin Up Poinsettia Petals card idea with Poinsettia Place DSP. 2020 Christmas card by Claire Daly Melbourne Australia.

My sentiment is from another stamp set called Joy and Peace, as I just wanted a small sentiment. I finished my card off with some gold cord trim and Gilded Gems. I'm really loving this beautiful Poinsettia flower and the dimension you can get by layering it and adding the gorgeous beaded pearl embellishment on top.

Stampin Up Poinsettia Petals card idea with Poinsettia Place DSP. 2020 Christmas card by Claire Daly Melbourne Australia.

 

Get free WEEKLY project tutorials

If you loved today's project, sign up for my free project tutorials which I send my subscribers every week!

Join my Subscriber Community for a free PDF Tutorial every week.

or Subscribe to receive all my Blog Posts by Email

Shutterstock_1456013552

Designer Series Paper Sale

October is a great month to stock up on Designer Series Papers. Check out the 15 paper packs on sale in October.

10-01-20_header_dsp_sale_na_uk_sp

You can find all the products I have used today in my Stampin' Up! Online Store, and all the individual products are linked at the bottom of the post. When you shop online with me in Australia, and use the monthly Host Code, you also qualify for a small thank you gift mid the month after your purchase. My customers love getting these little gifts in the mail. Here's the shop link (individual product links at the end of the post), and this month's host code. You can read about three ways to shop with me HERE.

Shop Online

October Host Code

Thanks so much for stopping by today. I hope you have a happy day and I hope to see you back here again soon.

Claire

Product List